Product Catalog

  • Manufacturer: Hitachi
  • Model Number: NV45AB2

5.5lbs, lightweight and well balanced for easy maneuverability
Side loading magazine convenient and easy for quick replenishment
Tool-less depth of drive adjustment for precision nailing/flush driving
Carbide tipped push lever reduces wear
Rubber pads help keep nailer from sliding off roof when not in use
Quick driving for maximum efficiency
Pneumatic power feed and return allows tool to operate in the harshest conditions
Long-lasting rubber grip for added comfort

  • Manufacturer: Hitachi
  • Model Number: NR83AA3

Equipped with a new, more secure selective actuation switch, which allows for easy transition from single to contact actuation
8.4 lbs, lightweight and well-balanced for easy maneuverability
Driving port suited for a wide range of available nails
Rear loading magazine for quick replenishments
Open nose design for easy extraction of a jammed nail
Rubber grip for add comfort
Hardened claw tip reduces wear and limits slippage when driving at a slanted angle

  • Manufacturer: Hitachi
  • Model Number: NT65MA2

15-Gauge Angled Finish Nails
4.4 lbs, lightweight and well balanced for easy maneuverability
Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation
Tool-less clogged nail release mechanism for greater ease of use
Depth of drive adjustment, for accurate nail depth in varying materials
Unique air duster, clears debris before material installation
Adjustable air deflector, directs the air exhaust in any direction
Long-lasting rubber grip, for added comfort

  • Manufacturer: Hitachi
  • Model Number: NT50AE2

NT50AE2 accepts 5/8" to 2" 18-gauge fasteners
New selective actuation switch lets the user easily select bump fire or sequential fire modes
At only 2.2 lbs, it is well balanced and lightweight to make finish work a breeze

  • Manufacturer: Hilti
  • Model Number: DX36

Easy to operate. Versatile tool for attaching material thicknesses ranging from drywall track to wood 2x4s to concrete or steel. Slim design for good access in tight spaces. Cartridge power regulator provides variable power for accurate fastenings.

  • Model Number: Ace 250

Features excellent detection depth, rugged design, and ease of operation.

  • Manufacturer: Marshalltown
  • Model Number: B5 72

The B5 72 Aluminum 6' Threaded Handle Section is for use with bull floats. WARNING: When using handle extensions, always avoid contact with electrical power lines or any electrical source

  • Manufacturer: Makita Power Tools
  • Model Number: 5402NA

This 16 5/16" Circular Saw has a large cutting capacity for beams and timbers and weighs only 32.1 lbs for ease of operation. The Powerful 15 AMP motor delivers enough power to cut through pressure treated lumber. The 7-1/4" Circular Saw is the #1 Contractor Saw preferred by professionals. It has a large cutting capacity and lower guard design which improves performance making bevel cuts

  • SKU: 553081
  • Model Number: 5687

Electric Wallcovering Steamer for easy removal of wall coverings

  • Manufacturer: MK Diamond
  • Model Number: 165486

The MK-BX-4 uses a patent pending misting system to control dust generated during cutting. The ergonomically designed, easy to grip nylon handle with built-in lockable trigger switchhandle allows for easy operation and control for either left or right handed cutting. Unique features include a removable plastic tray and a locking table with an adjustable depth stop to prevent cutting through the table. Portable and lightweight, the BX-4 encorporates an Open-back design that allows for material up to 16" long and 5" deep to be cut and the plastic dust collection pan with replaceable dust filter make on site dust control a snap

  • Manufacturer: MK Diamond
  • Model Number: 153243

The MK-101 Pro24 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The 101 Pro24 encorporates a variable height cutting head that allows for plunge cuts and use of blades smaller than 10" in diameter. The rugged Cast aluminum blade guard and motor post with a one-piece reinforced zinc-plated steel frame accommodates 6" and 8" profile wheels. A simple blade shaft lock makes for easy blade removal and the linear-bearing and chrome plated guide-bar assembly ensure precise cutting of tile up to 24" in length and 14" on the diagonal. Made in the USA with a One-year limited warranty

  • Manufacturer: MK Diamond
  • Model Number: 159943

The MK-370EXP features a Powerful high-torque motor with a maintenance-free, self-lubricating pinion and gear-box assembly. The tilting head allows for precise 45º miter cuts and a Variable height cutting feature allows for plunge cutting up to 2". The 370EXP has a sliding aluminum die-cast cutting table that rips 18" tile and 13" on the diagonal. The 3/4" diameter chrome-plated linear guide-bar system and single piece zinc-plated steel frame provide rigidity, strength and durability. A simple, hinged blade guard enables easy blade changes and the removable thermoplastic water reservoir makes for easy cleaning and maintenance of the saw. This item comes with a heavy duty on/off switch, built-in water pump receptacle, and 7" diamond blade & submersible water pump included. One-year limited warranty

  • Manufacturer: Milwaukee Tools
  • Model Number: 6509-22

11 Amp Sawzall Recip Saw w/Case

  • Manufacturer: Milwaukee Tools
  • Model Number: 9070-20

1/2" Square Drive 7 Amp Impact Wrench

  • Manufacturer: Milwaukee Tools
  • SKU: 611155
  • Model Number: 3107-6

1/2" Right Angle Drill, 0-335 RPM/0-750 RPM

  • Manufacturer: Milwaukee Tools
  • Model Number: 8985

Heat Gun 11.6A Varied Temp Kit

  • Manufacturer: Milwaukee Tools
  • SKU: 698472
  • Model Number: 6390-21

Tilt-Lok 7-1/4" Circular Saw with Case